GentooForum.de

Quellcode

darthvader tobue # /etc/init.d/net.eth1 start
 * Caching service dependencies ...                                       [ ok ]
 * Starting eth1  
*   Bringing up eth1 
 *     dhcp 
 *       network interface eth1 does not exist
  *       Please verify hardware or kernel module (driver)                 [ !! ] darthvader tobue

 # dmesg | grep -i ipw 
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2100: Detected Intel PRO/Wireless 2100 Network Connection ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed. ipw2100: eth1: ipw2100_get_firmware failed: -2 ipw2100: eth1: Failed to power on the adapter. ipw2100: eth1: Failed to start the firmware. ipw2100Error calling register_netdev. ipw2100: probe of 0000:02:02.0 failed with error -5 kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory. kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory. kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory. 

Quellcode

# module-rebuild rebuild
** Preparing to merge modules:
darthvader tobue #

Quellcode

darthvader tobue # grep IPW /usr/src/linux/.config
CONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not set
CONFIG_IPW2100_DEBUG=y
# CONFIG_IPW2200 is not set
darthvader tobue # emerge -vp ipw2100-firmware

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] net-wireless/ipw2100-firmware-1.3  0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB
darthvader tobue # lsmod
Module                  Size  Used by
darthvader tobue # ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0D:60:77:A7:FB
          inet addr:192.168.1.15  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20d:60ff:fe77:a7fb/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:620 errors:0 dropped:0 overruns:0 frame:0
          TX packets:426 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:151867 (148.3 Kb)  TX bytes:153863 (150.2 Kb)
          Base address:0x8000 Memory:c0220000-c0240000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Quellcode

# modprobe ipw2100

Quellcode

GNU nano 2.0.3      File: /etc/modules.autoload.d/kernel-2.6

# /etc/modules.autoload.d/kernel-2.6:  kernel modules to load when system boots.
#
# Note that this file is for 2.6 kernels.
#
# Add the names of modules that you'd like to load when the system
# starts into this file, one per line.  Comments begin with # and
# are ignored.  Read man modules.autoload for additional details.

# For example:
# aic7xxx
ipw2100

Quellcode

# dmesg | grep ipw2100
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth1: ipw2100_get_firmware failed: -2
ipw2100: eth1: Failed to power on the adapter.
ipw2100: eth1: Failed to start the firmware.
ipw2100Error calling register_netdev.
ipw2100: probe of 0000:02:02.0 failed with error -5
kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory.
kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory.
kobject_add failed for ipw2100 with -EEXIST, don't try to register things with the same name in the same directory.

Quellcode

strace -e file modprobe ipw2100
execve("/sbin/modprobe", ["modprobe", "ipw2100"], [/* 47 vars */]) = 0
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
open("/lib/libz.so.1", O_RDONLY)        = 3
open("/lib/libc.so.6", O_RDONLY)        = 3
open("/etc/modprobe.conf", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 ENOTDIR (Not a directory)
open("/etc/modprobe.conf", O_RDONLY)    = 3
open("/lib/modules/2.6.19-gentoo-r5/modules.dep", O_RDONLY) = 3
open("/lib/modules/2.6.19-gentoo-r5/kernel/drivers/net/wireless/ipw2100.ko", O_RDWR) = 3
open("/proc/modules", O_RDONLY)         = 6
Process 11101 detached