Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: GentooForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

1

25.03.2009, 17:34

Der Bootvorgang bricht ab und schwarzer Bildschirm mit weisem Cursor ist alles, was ich sehe!

Wenn ich mich nach dem booten in der Konsole einlogge und startx eingebe, startet kde-4.
Wenn ich rc-update add xdm default eingebe und neu boote, bleibt der Bildschirm schwarz mit weissem Cursor.
Jetzt habe ich schon fast alles ausprobiert, aber ohne besserung. Der einzige xorg-server, der funktioniert ist 1.3.0.0.
Wenn ich die xorg-server 1.4 - 1.5.3-r5 ausprobiere, habe ich oben genanntes Problem.

Woran kann das liegen??
:?: :?:

hier meine Xorg.0.log:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r7 i686
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 23 March 2009  08:44:45PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 16:33:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AIGLX" "true"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/OTF" does not exist.
        Entry deleted from font path.
(**) FontPath set to:
        /usr/share/fonts/misc/,
         /usr/share/fonts/TTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/corefonts/,
        /usr/share/fonts/cyrillic/,
        /usr/share/fonts/75dpi/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/local/,
        /usr/share/fonts/ukr/,
        /usr/share/fonts/freefonts/,
        /usr/share/fonts/xawtv/,
        /usr/share/fonts/sharefonts/,
        /usr/share/fonts/urw-fonts/,
        /usr/share/fonts/hunkyfonts/,
        /usr/share/fonts/intlfonts/,
        /usr/share/fonts/lfpfonts-fix/,
        /usr/share/fonts/alee-fonts/,
        /usr/share/fonts/artwiz/,
        /usr/share/fonts/ttf-bitstream-vera/,
        /usr/share/fonts/libdockapp-fonts/,
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/,
        built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x9a0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 9500 GT rev 161, Mem @ 0xf6000000/0, 0xe0000000/0, 0xf4000000/0, I/O @ 0x0000b000/0, BIOS @ 0x????????/524288
(II) System resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"

(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
(II) NVIDIA GLX Module  177.82  Tue Nov  4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Video Driver
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.2.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) NVIDIA dlloader X Driver  177.82  Tue Nov  4 13:42:45 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.94.4b.00.71
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9500 GT at PCI:1:0:0:
(--) NVIDIA(0):     HSD Hanns.G HX191 (DFP-0)
(--) NVIDIA(0): HSD Hanns.G HX191 (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): HSD Hanns.G HX191 (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(**) NVIDIA(0): Virtual screen size configured to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0):     be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0):     may not be set correctly.  When the ACPI daemon is
(II) NVIDIA(0):     available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0):     events.  For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mouse0"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mouse0"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "Standard"
(**) Keyboard1: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard1: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) Mouse1: ps2EnableDataReporting: succeeded


hier meine kdm.log:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 17 March 2009
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Mar 22 11:53:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module already built-in
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
SetClientVersion: 0 9
SetGrabKeysState - disabled
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
QThread::wait: Thread tried to wait on itself
QThread: Destroyed while thread is still running

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r7 i686
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 22 March 2009  03:22:48PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 08:25:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules/input//mouse_drv.so: undefined symbol: miPointerGetMotionEvents
(EE) Failed to load /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (loader failed, 7)
(EE) No Input driver matching `mouse'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/OTF, removing from list!

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r7 i686
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 22 March 2009  03:22:48PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 19:17:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules/input//mouse_drv.so: undefined symbol: miPointerGetMotionEvents
(EE) Failed to load /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (loader failed, 7)
(EE) No Input driver matching `mouse'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/OTF, removing from list!

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r7 i686
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 22 March 2009  03:22:48PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 19:54:05 2009
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules/input//mouse_drv.so: undefined symbol: miPointerGetMotionEvents
(EE) Failed to load /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (loader failed, 7)
(EE) No Input driver matching `mouse'
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/OTF, removing from list!

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-gentoo-r7 i686
Current Operating System: Linux localhost 2.6.27-gentoo-r7 #2 SMP Sun Jan 11 13:48:43 CET 2009 i686
Build Date: 23 March 2009  08:44:45PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 24 10:24:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "freetype" (module does not exist, 0)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von »andreasullrich« (12.07.2009, 19:46)


2

25.03.2009, 17:57

Quellcode

1
(EE) Failed to load module "freetype" (module does not exist, 0)


Quellcode

1
emerge media-libs/freetype


Würde ich mal sagen
Phenom X4 9550
Gigabyte GA-MA770-UD3
Gentoo 64 Bit Stable
8 GB Ram
Audigy 2 Zs
Geforce 9800 GTX
VDR
Hauppauge Nexus-S Rev 2.2 + 2.1

Lenovo G550 T4300
Gentoo 64 Bit Stable
4 GB Ram

3

25.03.2009, 18:24

Quellcode

1
(EE) Failed to load module "freetype" (module does not exist, 0)


Quellcode

1
emerge media-libs/freetype


Würde ich mal sagen


ist installiert

Quellcode

1
2
3
4
5
6
7
8
9
10
11
localhost claudia # eix freetype
[I] media-libs/freetype
     Available versions:
        (1)     1.4_pre20080316-r1
        (2)     2.3.7 2.3.7-r1 2.3.8 ~2.3.9
        {X bindist debug doc fontforge kpathsea nls utils}
     Installed versions:  2.3.8(2)(15:58:25 24.03.2009)(X doc fontforge utils -bindist -debug)
     Homepage:            http://www.freetype.org/
     Description:         A high-quality and portable font engine

localhost claudia #


und aktiviert in der xorg.conf

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
Section "Module"

    Load        "dbe"
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

Section "Files"

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/corefonts/"
    FontPath   "/usr/share/fonts/cyrillic/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/ukr/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
    FontPath   "/usr/share/fonts/freefonts/"
    FontPath   "/usr/share/fonts/xawtv/"
    FontPath   "/usr/share/fonts/sharefonts/"
    FontPath   "/usr/share/fonts/urw-fonts/"
    FontPath   "/usr/share/fonts/hunkyfonts/"
    FontPath   "/usr/share/fonts/intlfonts/"
    FontPath   "/usr/share/fonts/lfpfonts-fix/"
    FontPath   "/usr/share/fonts/alee-fonts/"
    FontPath   "/usr/share/fonts/artwiz/"
    FontPath   "/usr/share/fonts/ttf-bitstream-vera/"
    FontPath   "/usr/share/fonts/libdockapp-fonts/"

EndSection

Section "ServerFlags"

#    Option "NoTrapSignals"
#    Option "DontVTSwitch"
#    Option "DontZap"
#    Option "Dont Zoom"
#    Option "DisableVidModeExtension"
#    Option "AllowGLXWithComposite" "true"
#    Option "AllowNonLocalXvidtune"
#    Option "DisableModInDev"
#    Option "AllowNonLocalModInDev"
     Option "AutoAddDevices" "false"

EndSection

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"
    Option     "Protocol"      "Standard"
    Option "XkbVariant"  "nodeadkeys"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"  "de"

EndSection

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "CorePointer"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mouse0"
    Option "Name" "ImExPS/2 Logitech Explorer Mouse"
    Option "Phys" "isa0060/serio1/input0"
    Option "ZAxisMapping" "4 5"

EndSection


Section "Monitor"

    Identifier  "Monitor0"
    ModelName   "HX191D"
    VendorName  "HannsG"
    #Option      "DPMS"

EndSection

Section "Device"
    Identifier  "Device0"
#    VendorName "NV34"
    BoardName   "XFX GeForce 9500GT"
    Driver     "nvidia"
#    Option "NoLogo" "1"
    Option   "RenderAccel" "true"
    Option   "AllowGLXWithComposite" "true"

EndSection

Section "Screen"
    Identifier  "Screen0"
    Device      "Device0"
    Monitor     "Monitor0"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1600 1280
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
EndSection

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"
    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    Option      "AIGLX" "true"

EndSection
Section "DRI"
    Mode 0666
    Group 0
 EndSection

Section "Extensions"
        Option "Composite" "Enable"
#       Option "GLX" "true"
EndSection
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

4

26.03.2009, 01:37

Gibt es eine Fehlermeldung wenn du in einer Shell (als root)

Quellcode

1
/etc/init.d/xdm restart
eingibst?

PS:
Ich finde der Thread Titel ist sehr unpassend gewählt, geht es hier nicht eigentlich um den Start von kdm und kde-4.2 ?

5

26.03.2009, 07:47

Gibt es eine Fehlermeldung wenn du in einer Shell (als root)

Quellcode

1
/etc/init.d/xdm restart
eingibst?


Nein, im Gegenteil. Wenn ich nach dem Boot in der konsole stehe und mich anmelde, dann als root mit su einlogge und den Befehl:

"/etc/ini.d/xdm restart"
eingebe erscheint folgende Meldung:
"*Setting up Kdm... ok"
und es startet der kdm.
Leider funktioniert dieses aber nicht mit der weiter oben beschriebenen Methode.
Deshalb bin ich ratlos!

Zitat

PS:
Ich finde der Thread Titel ist sehr unpassend gewählt, geht es hier nicht eigentlich um den Start von kdm und kde-4.2 ?


hm... ob der unpassend ist? Ich habe im Titel nur erklärt, wie es abläuft. Aber Du hast schon recht. Ich könnte diesen genauer beschreiben. Nur weiss ich ja bis jetzt immer noch nicht, wo der Fehler liegt. Ob es kdm ist oder der xorg? Ich bin der Meinung, das es der xorg-server ist, da der 1.3.0.0 ja funktioniert. Aber die höheren Versionen dieses verursachen. korrigiere mich, wenn ich falsch denke.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »andreasullrich« (26.03.2009, 07:53)


6

26.03.2009, 09:46

IMHO ist irgendetwas noch nicht fertig gebootet. Kannst du das mal mit bsp. GDM auch mal testen?

Auch: wie sind deine runlevels? Welches baselayout/OpenRC verwendest du ?
http://www.dyle.org
IM-Account (Jabber!) sind auf meiner HP ...
There is no place like /home

http://www.gentooforum.de
http://www.gentoofreunde.org

<div>how to annoy a web developer?</span>

7

26.03.2009, 11:21

Was mir in deiner kdm.log auch noch aufgefallen ist..

Quellcode

1
2
3
4
5
6
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 08:25:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules/input//mouse_drv.so: undefined symbol: miPointerGetMotionEvents
(EE) Failed to load /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (loader failed, 7)
(EE) No Input driver matching `mouse'

wenn nicht schon geschehen setze in deiner make.conf bitte

Quellcode

1
INPUT_DEVICES="evdev keyboard mouse"
und prüfe ob mit "emerge -avuDN xorg-server" noch etwas neu gebaut werden muss.
Ich bin mir allerdings nicht ganz sicher ob der Eintrag in der kdm.log noch aktuell ist bzw noch zutrifft?
Lösche die kdm.log sonnst bitte mal, dann wirds ein wenig übersichtlicher.
Schaden kann dieses vorgehen aus dem oben genannten Rat jedoch nicht.

Auch ein "revdep-rebuild" solltest du noch mal laufen lassen.

8

26.03.2009, 16:44

IMHO ist irgendetwas noch nicht fertig gebootet. Kannst du das mal mit bsp. GDM auch mal testen?

Auch: wie sind deine runlevels? Welches baselayout/OpenRC verwendest du ?


Ich habe gdm ausprobiert und der bootet hoch. Aber der Vorgang ist seltsam. Er fährt hoch, nvidia-logo kommt, dann konsole, nvidia-logo nochmal, dann gdm. Sonst hat er ganz normal durchgebootet mit nvidia-logo und dann kdm.

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
andreas@localhost ~ $ eix baselayout
[D] sys-apps/baselayout
     Available versions:  [P]1.11.15-r3 1.12.11.1 ~1.12.12 ~2.0.0 {bootstrap build static unicode}
     Installed versions:  2.0.0(00:23:33 09.03.2009)(-build)
     Homepage:            http://www.gentoo.org/
     Description:         Filesystem baselayout and init scripts

andreas@localhost ~ $ eix openrc
[I] sys-apps/openrc
     Available versions:  ~0.4.1-r1 ~0.4.2 (~)0.4.3-r1 **9999 {debug elibc_glibc kernel_FreeBSD kernel_linux ncurses pam unicode}
     Installed versions:  0.4.3-r1(14:21:54 10.03.2009)(elibc_glibc kernel_linux ncurses pam unicode -debug -kernel_FreeBSD)
     Homepage:            http://roy.marples.name/openrc
     Description:         OpenRC manages the services, startup and shutdown of a host
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »andreasullrich« (26.03.2009, 17:22)


9

26.03.2009, 17:24

Was mir in deiner kdm.log auch noch aufgefallen ist..

Quellcode

1
2
3
4
5
6
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 08:25:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules/input//mouse_drv.so: undefined symbol: miPointerGetMotionEvents
(EE) Failed to load /usr/lib/xorg/modules/input//mouse_drv.so
(EE) Failed to load module "mouse" (loader failed, 7)
(EE) No Input driver matching `mouse'

wenn nicht schon geschehen setze in deiner make.conf bitte

Quellcode

1
INPUT_DEVICES="evdev keyboard mouse"
und prüfe ob mit "emerge -avuDN xorg-server" noch etwas neu gebaut werden muss.
Ich bin mir allerdings nicht ganz sicher ob der Eintrag in der kdm.log noch aktuell ist bzw noch zutrifft?
Lösche die kdm.log sonnst bitte mal, dann wirds ein wenig übersichtlicher.
Schaden kann dieses vorgehen aus dem oben genannten Rat jedoch nicht.

Auch ein "revdep-rebuild" solltest du noch mal laufen lassen.


Die Probleme mit der Maus sind schon behoben. Dieser Auszug ist also schon älter.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

10

27.03.2009, 08:45

In der /etc/conf.d/rc hast du aber nicht RC_PARALLEL_STARTUP enabled, oder?
http://www.dyle.org
IM-Account (Jabber!) sind auf meiner HP ...
There is no place like /home

http://www.gentooforum.de
http://www.gentoofreunde.org

<div>how to annoy a web developer?</span>

11

27.03.2009, 22:21

Nein
hier der Auszug:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
# /etc/conf.d/rc: Global config file for the Gentoo RC System

# This is the number of tty's used in most of the rc-scripts (like
# consolefont, numlock, etc ...)

RC_TTY_NUMBER=11

# Set to "yes" if you want the rc system to try and start services
# in parallel for a slight speed improvement. NOTE: When RC_PARALLEL_STARTUP
# is enabled, init script output is replaced with simple "service foo
# starting/stopping" messages so that output is not mixed up.
# You can stop this from happening on the command line by passing --verbose
# to the init script or by setting RC_VERBOSE="yes" below.

RC_PARALLEL_STARTUP="no"

# Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "no" to disable
# this feature.

RC_INTERACTIVE="yes"

# Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no"
# NOTE: This does not affect anything hotplug/udev related, just the
# starting/stopping of the init.d service triggered by hotplug.

RC_HOTPLUG="yes"

# Dynamic /dev managers can trigger coldplug events which cause services to
# start before we are ready for them. If this happens, we can defer these
# services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't
# want this.
# NOTE: This also affects module coldplugging in udev-096 and higher
# If you want module coldplugging but not coldplugging of services then you
# can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*"

RC_COLDPLUG="yes"

# Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is a
# list of services that are matched in order, either allowing or not. By
# default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes
# anyway.
# Example - RC_PLUG_SERVICES="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be plugged.

RC_PLUG_SERVICES=""

# RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service.
# The following values are allowed:
#  none  - The 'net' service is always considered up.
#  no    - This basically means that at least one net.* service besides net.lo
#          must be up.  This can be used by notebook users that have a wifi and
#          a static nic, and only wants one up at any given time to have the
#          'net' service seen as up.
#  lo    - This is the same as the 'no' option, but net.lo is also counted.
#          This should be useful to people that do not care about any specific
#          interface being up at boot.
#  yes   - For this ALL network interfaces MUST be up for the 'net' service to
#          be considered up.

RC_NET_STRICT_CHECKING="no"

# RC_DOWN_INTERFACE allows you to specify if RC will bring the interface
# completely down when it stops. The default is yes, but there are some
# instances where you may not want this to happen such as using Wake On LAN.

RC_DOWN_INTERFACE="yes"

# RC_VOLUME_ORDER allows you to specify, or even remove the volume setup
# for various volume managers (MD, EVMS2, LVM, DM, etc).  Note that they are
# stopped in reverse order.

RC_VOLUME_ORDER="raid evms lvm dm"

# RC_VERBOSE will make init scripts more verbose. Only networking scripts
# really use this at this time, and this is useful for trouble shooting
# any issues you may have.
# This is also used to re-enable init script output for init scripts
# started or stopped from the command line.

RC_VERBOSE="no"

# RC_BOOTLOG will generate a log of the boot messages shown on the console.
# Useful for headless machines or debugging.  You need to emerge the
# app-admin/showconsole package for this to work.  Note that this probably
# won't work correctly with boot splash.

RC_BOOTLOG="no"

# Set to "yes" if you want to benchmark system boot with bootchart.
# You'll need to emerge the app-benchmarks/bootchart package for this to work.

RC_BOOTCHART="no"

# RC_USE_FSTAB allows you to override the default mount options for the
# standard /proc, /sys, /dev, and /dev/pts mount points.  Note that this
# is the new way for selecting ramfs/tmpfs/etc... for udev mounting.

RC_USE_FSTAB="no"

# RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files
# based on your runlevel - if a conf.d file for your profile does not exist
# then we try and use the default one.
# To enable runlevel selection at boot, append "softlevel=foobar" to your
# kernel line to change to the foobar runlevel.  Here we would search for
# /etc/conf.d/<service>.foobar config files before trying to use the default
# /etc/conf.d/<service>.
# Note that it is only active if 'softlevel' was specified via the kernel line,
# and it is intended to use for different grub/lilo entries to specify config
# changes for say laptops between home and work, where you would have setup
# 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as needed.

RC_USE_CONFIG_PROFILE="yes"

# RC_FORCE_AUTO tries its best to prevent user interaction during the boot and
# shutdown process.  For example, fsck will automatically be run or volumes
# remounted to create proper directory trees.  This feature can be dangerous
# and is meant ONLY for headless machines where getting a physical console
# hooked up is a huge pita.

RC_FORCE_AUTO="no"

# Use this variable to control the /dev management behavior.
#  auto   - let the scripts figure out what's best at boot
#  devfs  - use devfs (requires sys-fs/devfsd)
#  udev   - use udev (requires sys-fs/udev)
#  static - let the user manage /dev (YOU need to create ALL device nodes)

RC_DEVICES="auto"

# UDEV OPTION:
# Set to "yes" if you want to save /dev to a tarball on shutdown
# and restore it on startup.  This is useful if you have a lot of
# custom device nodes that udev does not handle/know about.

RC_DEVICE_TARBALL="no"

# RC_DMESG_LEVEL sets the level at which logging of messages is done to the
# console.  See dmesg(8) for more info.

RC_DMESG_LEVEL="1"





#
# Controlling start-stop-daemon behavior

# Set to "yes" if start-stop-daemon should always retry killing the
# service with sig KILL if it fails the first time.
RC_RETRY_KILL="yes"


# Set the amount of seconds start-stop-daemon should wait between
# retries.

RC_RETRY_TIMEOUT=1


# Set the amount of times start-stop-daemon should try to kill
# a service before giving up.

RC_RETRY_COUNT=5


# Set to "yes" if start-stop-daemon should fail if the service
# is marked as started, but not actually running on stop.

RC_FAIL_ON_ZOMBIE="no"


# Set to "yes" if start-stop-daemon should attempt to kill
# any children left in the system.
# Be careful with this as it really does what it was on the tin.
# fex, if you're in an ssh process and you restart a service on which ssh
# depends then your terminal will be killed also.

RC_KILL_CHILDREN="no"


# Set the amount of seconds start-stop-daemon waits after starting
# the daemon to check it is still running. If it's not then we
# try and stop any children if possible.
RC_WAIT_ON_START="0.1"


##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.

# Some daemons are started and stopped via start-stop-daemon.
# We can launch them through other daemons here, for example valgrind.
# This is only useful for serious debugging of the daemon
# WARNING: If the script's "stop" function does not supply a PID file then
# all processes using the same daemon will be killed.
#RC_DAEMON="/usr/bin/valgrind --tool=memcheck --log-file=/tmp/valgrind.syslog-ng"
# Pass ulimit parameters
#RC_ULIMIT="-u 30"

##############################################################################


#
# Internal configuration variables
#
# NB:  These are for advanced users, and you should really
#      know what you are doing before changing them!
#

# rc-scripts dep-cache directory
#
# NOTE:  Do not remove the next line, as its needed by the baselayout ebuild!
#
#  svcdir="/var/lib/init.d"

svcdir="/var/lib/init.d"

# Should we mount $svcdir in a ram disk for some speed increase
# for slower machines, or for the more extreme setups ?

svcmount="no"

# FS type that should be used for $svcdir.  Note that you need
# $svcmount above set to "yes" for this to work ...  Currently
# tmpfs, ramfs, and ramdisk are supported (tmpfs is the default).

svcfstype="tmpfs"

# Size of $svcdir in KB.  Note that ramfs doesn't support this
# due to kernel limitations.

svcsize=2048
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

12

27.03.2009, 23:05

Schwarz mit weißen Kursor. Das bedeutet Du bist auf einer freien TTY gelandet. Kannst Du mit ALT+F1 bis ALT+F9 prüfen, ob der X-Server auf einer anderen TTY gestartet wurde, als Du gelandet bist?
Prüfe mal, ob auf der ersten Konsole im Boot-Vorgang Fehler sind, dass Dienste nach xdm nicht gestartet werden konnten.
Wähle dich auf einer TTY ein und prüfe mit "ps xf | grep bin/X" ob ein X-Server Prozess läuft.
Falls nicht, prüfe die Xorg.0.log Datei OHNE vorher mit startx oä. diese zu überschreiben.
Auch wenn Open-Source kostenlos ist, ist sie nicht umsonst. Dein Preis ist Dein Engagement und Mitarbeit an OS-Projekten.
Wenn Du keinen Preis bezahlen willst, bist Du die Ware. Und das ist nicht Open Source, geschweigedenn frei.

13

28.03.2009, 06:40

Alle überprüft!
Kein vernünftiges Ergebnis!
Auf der ersten Konsole ist der Boot-Login - ohne Fehlermeldung
auf 2,3,4,5,6 auch Boot-login
auf 7,8,9 schwarzer Bildschirm, weisser Cursor
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

14

28.03.2009, 13:31

Hm.. "/etc/conf.d/rc" sollte es bei dir eigentlich gar nicht mehr geben, da du baselayout-2 mit OpenRC installiert hast.
Gehe doch bitte (nochmal ?) den Migrationsleitfaden zu Baselayout/OpenRC Schritt für Schritt durch, und überprüfe deine Konfiguration.

Siehe http://www.gentoo.org/doc/en/openrc-migration.xml
(er ist auch in Deutsch verfügbar, einfach "en" gegen "de" in dem URL austauschen)

15

28.03.2009, 19:09

hier meine rc.conf:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
# Global OpenRC configuration settings

# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with it's name as the output will get
# jumbled up.
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
rc_parallel="NO"

# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature.
rc_interactive="YES"

# Do we allow any started service in the runlevel to satisfy the depedency
# or do we want all of them regardless of state? For example, if net.eth0
# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
# both will be started, but services that depend on 'net' will work if either
# one comes up. With rc_depend_strict="YES" we would require them both to
# come up.
rc_depend_strict="YES"

# rc_hotplug is a list of services that we allow to be hotplugged.
# By default we do not allow hotplugging.
# A hotplugged service is one started by a dynamic dev manager when a matching
# hardware device is found.
# This service is intrinsically included in the boot runlevel.
# To disable services, prefix with a !
# Example - rc_hotplug="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be plugged.
# Example - rc_hotplug="*"
# This allows all services to be hotplugged
rc_hotplug="yes"

# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
# NOTE: Linux systems require the devfs service to be started before
# logging can take place and as such cannot log the sysinit runlevel.
rc_logger="yes"

# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
# rc_env_allow="VAR1 VAR2"

# By default we assume that all daemons will start correctly.
# However, some do not - a classic example is that they fork and return 0 AND
# then child barfs on a configuration error. Or the daemon has a bug and the
# child crashes. You can set the number of milliseconds start-stop-daemon
# waits to check that the daemon is still running after starting here.
# The default is 0 - no checking.
# rc_start_wait=100

##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts

# Set unicode to YES to turn on unicode support for keyboards and screens.
unicode="YES"

# Network fstypes. Below is the default.
net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"

##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.

# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#export SSD_NICELEVEL="-19"

# Pass ulimit parameters
#rc_ulimit="-u 30"

# It's possible to define extra dependencies for services like so
#rc_config="/etc/foo"
#rc_need="openvpn"
#rc_use="net.eth0"
#rc_after="clock"
#rc_before="local"
#rc_provide="!net"

# You can also enable the above commands here for each service. Below is an
# example for service foo.
#rc_foo_config="/etc/foo"
#rc_foo_need="openvpn"
#rc_foo_after="clock"

# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"

##############################################################################
# LINUX SPECIFIC OPTIONS

# This is the number of tty's used in most of the rc-scripts (like
# consolefont, numlock, etc ...)
rc_tty_number=11


hier meine /etc/conf.d/rc:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
# /etc/conf.d/rc: Global config file for the Gentoo RC System

# This is the number of tty's used in most of the rc-scripts (like
# consolefont, numlock, etc ...)

RC_TTY_NUMBER=11

# Set to "yes" if you want the rc system to try and start services
# in parallel for a slight speed improvement. NOTE: When RC_PARALLEL_STARTUP
# is enabled, init script output is replaced with simple "service foo
# starting/stopping" messages so that output is not mixed up.
# You can stop this from happening on the command line by passing --verbose
# to the init script or by setting RC_VERBOSE="yes" below.

RC_PARALLEL_STARTUP="no"

# Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "no" to disable
# this feature.

RC_INTERACTIVE="yes"

# Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no"
# NOTE: This does not affect anything hotplug/udev related, just the
# starting/stopping of the init.d service triggered by hotplug.

RC_HOTPLUG="yes"

# Dynamic /dev managers can trigger coldplug events which cause services to
# start before we are ready for them. If this happens, we can defer these
# services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't
# want this.
# NOTE: This also affects module coldplugging in udev-096 and higher
# If you want module coldplugging but not coldplugging of services then you
# can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*"

RC_COLDPLUG="yes"

# Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is a
# list of services that are matched in order, either allowing or not. By
# default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes
# anyway.
# Example - RC_PLUG_SERVICES="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be plugged.

RC_PLUG_SERVICES=""

# RC_NET_STRICT_CHECKING allows some flexibility with the 'net' service.
# The following values are allowed:
#  none  - The 'net' service is always considered up.
#  no    - This basically means that at least one net.* service besides net.lo
#          must be up.  This can be used by notebook users that have a wifi and
#          a static nic, and only wants one up at any given time to have the
#          'net' service seen as up.
#  lo    - This is the same as the 'no' option, but net.lo is also counted.
#          This should be useful to people that do not care about any specific
#          interface being up at boot.
#  yes   - For this ALL network interfaces MUST be up for the 'net' service to
#          be considered up.

RC_NET_STRICT_CHECKING="no"

# RC_DOWN_INTERFACE allows you to specify if RC will bring the interface
# completely down when it stops. The default is yes, but there are some
# instances where you may not want this to happen such as using Wake On LAN.

RC_DOWN_INTERFACE="yes"

# RC_VOLUME_ORDER allows you to specify, or even remove the volume setup
# for various volume managers (MD, EVMS2, LVM, DM, etc).  Note that they are
# stopped in reverse order.

RC_VOLUME_ORDER="raid evms lvm dm"

# RC_VERBOSE will make init scripts more verbose. Only networking scripts
# really use this at this time, and this is useful for trouble shooting
# any issues you may have.
# This is also used to re-enable init script output for init scripts
# started or stopped from the command line.

RC_VERBOSE="no"

# RC_BOOTLOG will generate a log of the boot messages shown on the console.
# Useful for headless machines or debugging.  You need to emerge the
# app-admin/showconsole package for this to work.  Note that this probably
# won't work correctly with boot splash.

RC_BOOTLOG="no"

# Set to "yes" if you want to benchmark system boot with bootchart.
# You'll need to emerge the app-benchmarks/bootchart package for this to work.

RC_BOOTCHART="no"

# RC_USE_FSTAB allows you to override the default mount options for the
# standard /proc, /sys, /dev, and /dev/pts mount points.  Note that this
# is the new way for selecting ramfs/tmpfs/etc... for udev mounting.

RC_USE_FSTAB="no"

# RC_USE_CONFIG_PROFILE allows you to have different /etc/conf.d files
# based on your runlevel - if a conf.d file for your profile does not exist
# then we try and use the default one.
# To enable runlevel selection at boot, append "softlevel=foobar" to your
# kernel line to change to the foobar runlevel.  Here we would search for
# /etc/conf.d/<service>.foobar config files before trying to use the default
# /etc/conf.d/<service>.
# Note that it is only active if 'softlevel' was specified via the kernel line,
# and it is intended to use for different grub/lilo entries to specify config
# changes for say laptops between home and work, where you would have setup
# 'work' and 'home' runlevels, with /etc/conf.d/*.<runlevel> as needed.

RC_USE_CONFIG_PROFILE="yes"

# RC_FORCE_AUTO tries its best to prevent user interaction during the boot and
# shutdown process.  For example, fsck will automatically be run or volumes
# remounted to create proper directory trees.  This feature can be dangerous
# and is meant ONLY for headless machines where getting a physical console
# hooked up is a huge pita.

RC_FORCE_AUTO="no"

# Use this variable to control the /dev management behavior.
#  auto   - let the scripts figure out what's best at boot
#  devfs  - use devfs (requires sys-fs/devfsd)
#  udev   - use udev (requires sys-fs/udev)
#  static - let the user manage /dev (YOU need to create ALL device nodes)

RC_DEVICES="auto"

# UDEV OPTION:
# Set to "yes" if you want to save /dev to a tarball on shutdown
# and restore it on startup.  This is useful if you have a lot of
# custom device nodes that udev does not handle/know about.

RC_DEVICE_TARBALL="no"

# RC_DMESG_LEVEL sets the level at which logging of messages is done to the
# console.  See dmesg(8) for more info.

RC_DMESG_LEVEL="1"





#
# Controlling start-stop-daemon behavior

# Set to "yes" if start-stop-daemon should always retry killing the
# service with sig KILL if it fails the first time.
RC_RETRY_KILL="yes"


# Set the amount of seconds start-stop-daemon should wait between
# retries.

RC_RETRY_TIMEOUT=1


# Set the amount of times start-stop-daemon should try to kill
# a service before giving up.

RC_RETRY_COUNT=5


# Set to "yes" if start-stop-daemon should fail if the service
# is marked as started, but not actually running on stop.

RC_FAIL_ON_ZOMBIE="no"


# Set to "yes" if start-stop-daemon should attempt to kill
# any children left in the system.
# Be careful with this as it really does what it was on the tin.
# fex, if you're in an ssh process and you restart a service on which ssh
# depends then your terminal will be killed also.

RC_KILL_CHILDREN="no"


# Set the amount of seconds start-stop-daemon waits after starting
# the daemon to check it is still running. If it's not then we
# try and stop any children if possible.
RC_WAIT_ON_START="0.1"


##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.

# Some daemons are started and stopped via start-stop-daemon.
# We can launch them through other daemons here, for example valgrind.
# This is only useful for serious debugging of the daemon
# WARNING: If the script's "stop" function does not supply a PID file then
# all processes using the same daemon will be killed.
#RC_DAEMON="/usr/bin/valgrind --tool=memcheck --log-file=/tmp/valgrind.syslog-ng"
# Pass ulimit parameters
#RC_ULIMIT="-u 30"

##############################################################################


#
# Internal configuration variables
#
# NB:  These are for advanced users, and you should really
#      know what you are doing before changing them!
#

# rc-scripts dep-cache directory
#
# NOTE:  Do not remove the next line, as its needed by the baselayout ebuild!
#
#  svcdir="/var/lib/init.d"

svcdir="/var/lib/init.d"

# Should we mount $svcdir in a ram disk for some speed increase
# for slower machines, or for the more extreme setups ?

svcmount="no"

# FS type that should be used for $svcdir.  Note that you need
# $svcmount above set to "yes" for this to work ...  Currently
# tmpfs, ramfs, and ramdisk are supported (tmpfs is the default).

svcfstype="tmpfs"

# Size of $svcdir in KB.  Note that ramfs doesn't support this
# due to kernel limitations.

svcsize=2048
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

16

29.03.2009, 11:38

Bist du den Migrationsleitfaden nun noch mal durchgegangen?

rc_hotplug="yes"
Beachte das in der neuen, nun verwendeten /etc/rc.conf die Parameter groß geschrieben werden, also "YES" nicht "yes"

Poste doch bitte mal die Ausgaben von

Quellcode

1
2
3
# rc-status
und
# rc-update show

17

29.03.2009, 21:45

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
localhost claudia # rc-status
* Caching service dependencies...                                                                                                                                             [ ok ]
Runlevel: default
 dbus                                                                                                                                                                  [  started  ]
 syslog-ng                                                                                                                                                             [  started  ]
 consolekit                                                                                                                                                            [  started  ]
 hald                                                                                                                                                                  [  started  ]
 netmount                                                                                                                                                              [  started  ]
 xdm                                                                                                                                                                   [  started  ]
 cupsd                                                                                                                                                                 [  started  ]
 sshd                                                                                                                                                                  [  started  ]
 timidity                                                                                                                                                              [  crashed  ]
 vixie-cron                                                                                                                                                            [  started  ]
 local                                                                                                                                                                 [  started  ]
Runlevel: hotplugged
 udev-postmount                                                                                                                                                        [  started  ]
 net.eth2                                                                                                                                                              [  started  ]
Runlevel: needed
 udev-mount                                                                                                                                                            [  started  ]
 udev-dev-tarball                                                                                                                                                      [  started  ]
Runlevel: manual
 udev-postmount

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
localhost claudia # rc-update show
             bootmisc | boot
                 fsck | boot
             hostname | boot
                local |      default nonetwork
           localmount | boot
             netmount |      default
                 root | boot
            savecache |                                       shutdown
                 swap | boot
               sysctl | boot
              urandom | boot
                devfs |                               sysinit
                dmesg |                               sysinit
                 udev |                               sysinit
                 sshd |      default
            syslog-ng |      default
           vixie-cron |      default
              hwclock | boot
                 dbus |      default
                 hald |      default
        device-mapper | boot
            alsasound | boot
                  xdm |      default
                cupsd |      default
           consolekit |      default
             net.eth2 | boot
                 mtab | boot
           fbcondecor | boot
          consolefont | boot
              keymaps | boot
            killprocs |                                       shutdown
              modules | boot
             mount-ro |                                       shutdown
               procfs | boot
         termencoding | boot
               net.lo | boot
localhost claudia #


Seltsam ist, das ich vorhin neu gebootet habe, die festplatte überprüft wurde und der kdm funktionierte. Daraufhin habe ich nochmals gebootet und der schwarze Bildschirm war wieder da.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

18

30.03.2009, 08:30

Ich glaube, ich habe das Problem gefunden. Ich mache jetzt einige Tests, damit ich mir auch ganz sicher bin.

Die momentane Änderung: "hald" und "dbus" vom "default-Level" in den "boot-Level" gesetzt.
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

19

30.03.2009, 08:34

jo, funzt. habe dreimal hintereinander neu gebootet. Jedesmal lande ich im kdm. Das ist sehr schön!!
Da setzte ich diesen Beitrag mal auf gelöst.


:thumbsup: :thumbup:
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

20

31.03.2009, 20:06

man, jetzt geht es schon wieder los. Irgendwo ist da der Wurm noch drin.
Wenn ich einen Warmstart hinlege, geht es. Bei einen Kaltstart nicht. Hm....
Ullrich Andreas
Meine Konfiguration:
x86_64/Gentoo-10.1/gcc Version 4.5.3/KDE-Version 4.9.3/Kernel version 2.6.34-gentoo-r6
Graphic: 2x Nvidia 9600-GT OC SLI,Drucker: Samsung CLP-315W

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »andreasullrich« (31.03.2009, 23:26)