ATI und Xorg keine Fehlermeldung und läuft doch nicht

Anfänger

17.02.2005, 09:16

Hallo,
ich bin langsam echt am verzweifeln. Ich habe hier schon alle Beträge durchforstet, meine Radeon 9600 will aber einfach nicht laufen. Beim Start von X erscheint ein schwarzer Bildschirm. In der Mitte blitzt dann kurz der x-Mauscursor auf und ich befinde mich dann wieder auf der Konsole im Textmodus und erhalte keine! Fehlermeldung.
Ich habe auch schon versucht, eine von Knoppix generierte XF86Config an Xorg anzupassen und damit zu starten. Leider auch kein Erfolg. Es geht also weder mit noch ohne dem fglrx-Treiber. Der wird übrigends ohne Fehlermeldungen geladen.
Ich weiß jetzt wirklich nicht mehr weiter.
Vielleicht weiß ja jemand Rat.
Ich habe mal die xorg.conf, die xorg.0.log und das wichtigste aus der /usr/src/linux/.config drangehängt.
Gruß Jens

Hier mein xorg.conf:

Quellcode

Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666

Section "Module"

    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection


Section "Files"
   
 RgbPath	"/usr/X11R6/lib/X11/rgb"

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection


Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"de"

EndSection


Section "InputDevice"

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/ttyS0"

EndSection


Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   30 - 96
    VertRefresh 50 - 160
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:2:0:0"    # vendor=1002, device=4150
    Screen 0
EndSection


Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1280x1024" "1024x768"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection


Section "ServerLayout"

    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Dann noch meine xorg.0.log:

Quellcode

X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.9-gentoo-r13 i686 [ELF] 
Current Operating System: Linux 007.local 2.6.10-gentoo-r6 #2 SMP Thu Feb 17 06:47:19 Local time zone must be set--see zic  i686
Build Date: 15 February 2005
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 17 06:54:12 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80020014, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev a2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1695,1000 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1695,1000 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1695,1000 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1695,1000 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1695,1000 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1695,1000 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1695,1000 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1695,1000 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1695,1000 rev a3 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1695,1000 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1695,1000 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1695,1000 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0d:0: chip 10de,006e card 1695,1000 rev a3 class 0c,00,10 hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 109e,036e card 0070,13eb rev 02 class 04,00,00 hdr 80
(II) PCI: 01:07:1: chip 109e,0878 card 0070,13eb rev 02 class 04,80,00 hdr 80
(II) PCI: 01:08:0: chip 1131,7146 card 13c2,100f rev 01 class 04,80,00 hdr 00
(II) PCI: 01:0a:0: chip 1102,0002 card 1102,0020 rev 04 class 04,01,00 hdr 80
(II) PCI: 01:0a:1: chip 1102,7002 card 1102,0020 rev 01 class 09,80,00 hdr 80
(II) PCI: 01:0b:0: chip 109e,036e card 0070,4500 rev 11 class 04,00,00 hdr 80
(II) PCI: 01:0b:1: chip 109e,0878 card 0070,4500 rev 11 class 04,80,00 hdr 80
(II) PCI: 02:00:0: chip 1002,4150 card 148c,2064 rev 00 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,4170 card 148c,2065 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xd6000000 - 0xd6ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xd5000000 - 0xd5ffffff (0x1000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xb0000000 - 0xcfffffff (0x20000000) MX[B]
(--) PCI: (1:7:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xd4000000/12
(--) PCI: (1:11:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd4002000/12
(--) PCI:*(2:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xb0000000/28, 0xd5020000/16, I/O @ 0xd000/8
(--) PCI: (2:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xc0000000/28, 0xd5030000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[1] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[2] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[3] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[4] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[5] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[6] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[7] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[8] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[10] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[11] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[12] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[13] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[14] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[15] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[16] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[18] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[19] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
	[0] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[1] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[1] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[2] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[3] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[4] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[5] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[6] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[7] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[8] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[10] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[11] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[12] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[13] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[14] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[15] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[16] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[17] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[18] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[19] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[1] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[6] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[7] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[8] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[9] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[10] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[11] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[12] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[13] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[14] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[15] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[16] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[17] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[18] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[19] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[20] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[24] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[25] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[26] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[28] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.8.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.8.25
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
	FireGL - (RV250 4964), FireGL - (RV250 4965),
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY FireGL - (M9 4C65),
	MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67),
	RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961),
	RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61),
	MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148),
	RADEON 8500 (R200 514C), RADEON 9100 (R200 514D),
	RADEON - (R200 5154), RADEON - (R200 5155),
	RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150),
	RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
	RADEON - (R300 4145), RADEON 9600 TX (R300 4146),
	FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
	RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
	FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
	FireGL - (R350 414B), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), FireGL - (RV350 4155), FireGL - (RV350 4156),
	FireGL - (RV350 4157), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON - (RV370 5B61), RADEON X600 (RV380 5B62),
	RADEON - (RV370 5B63), FireGL V3100 (RV370 5B64),
	FireGL - (RV370 5B66), FireGL - (RV370 5B67),
	MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON - (M22 5461),
	MOBILITY RADEON - (M22 5462), MOBILITY RADEON - (M22 5463),
	MOBILITY FireGL V3100 (M22 5464), MOBILITY FireGL - (M22 5465),
	MOBILITY FireGL - (M22 5466), MOBILITY FireGL - (M22 5467),
	RADEON X600 (RV380 3E50), RADEON - (RV380 3E51),
	RADEON - (RV380 3E52), RADEON - (RV380 3E53),
	FireGL V3200 (RV380 3E54), FireGL - (RV380 3E55),
	FireGL - (RV380 3E56), FireGL - (RV380 3E57),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON - (M24 3151),
	MOBILITY RADEON X300 (M22 3152), MOBILITY RADEON - (M24 3153),
	MOBILITY FireGL V3200* (M24 3154), MOBILITY FireGL -* (M24 3155),
	MOBILITY FireGL -* (M24 3156), MOBILITY FireGL -* (M24 3157),
	RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49),
	RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B),
	RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D),
	MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	FireGL -* (R423 5552), MOBILITY RADEON X800 XT (M28 5D48),
	MOBILITY FireGL V5100* (M28 5D49), RADEON X700 XT (RV410 5E4A),
	RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
	RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F),
	RADEON - (RV410 5E52), RADEON - (RV410 5E53), RADEON - (RV410 5E55),
	RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 02:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset RADEON 9600 (RV350 4150) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[6] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[7] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[8] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[9] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[10] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[11] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[12] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[13] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[14] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[15] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[16] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[17] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[18] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[19] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[20] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[24] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[25] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[26] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[28] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81d52b8
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[6] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[7] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[8] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[9] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[10] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[11] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[12] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[13] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[14] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[15] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[16] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[17] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[18] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[19] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[20] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[21] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[22] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[23] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[26] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[27] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[28] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[29] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[30] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[31] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9600 (RV350 4150)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x148c, PciSubDevice = 0x2064)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xd5020000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x04
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS -------- 
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option: 
	Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
 Monitor   -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) fglrx(0): Secondary head:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: SIE  Model: 110  Serial#: 24941
(II) fglrx(0): Year: 1999  Week: 36
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 36  vert.: 27
(II) fglrx(0): Gamma: 2.28
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.638 redY: 0.325   greenX: 0.276 greenY: 0.596
(II) fglrx(0): blueX: 0.143 blueY: 0.066   whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #1: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) fglrx(0): #3: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) fglrx(0): #4: hsize: 800  vsize 600  refresh: 100  vid: 26693
(II) fglrx(0): #5: hsize: 1024  vsize 768  refresh: 100  vid: 26721
(II) fglrx(0): #6: hsize: 1152  vsize 864  refresh: 85  vid: 22897
(II) fglrx(0): #7: hsize: 1152  vsize 864  refresh: 100  vid: 26737
(II) fglrx(0): Monitor name: MCM 19P1
(II) fglrx(0): Serial No: YEDB024941
(II) fglrx(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 96 kHz, PixClock max 210 MHz
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 157.5 MHz   Image Size:  352 x 264 mm
(II) fglrx(0): h_active: 1280  h_sync: 1344  h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) fglrx(0): 
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0):  PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Default mode "1600x1200": 202.5 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1600x1200"  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) fglrx(0): *Default mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) fglrx(0):  Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (112, 112)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.8.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.99.902, module version = 8.8.25
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000070c
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd5020000 - 0xd502ffff (0x10000) MX[B]
	[1] 0	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xd4003000 - 0xd4003fff (0x1000) MX[B]
	[8] -1	0	0xd6000000 - 0xd60001ff (0x200) MX[B]
	[9] -1	0	0xd4001000 - 0xd4001fff (0x1000) MX[B]
	[10] -1	0	0xd7004000 - 0xd700403f (0x40) MX[B]
	[11] -1	0	0xd7003000 - 0xd70037ff (0x800) MX[B]
	[12] -1	0	0xd7006000 - 0xd7006fff (0x1000) MX[B]
	[13] -1	0	0xd7005000 - 0xd70050ff (0x100) MX[B]
	[14] -1	0	0xd7002000 - 0xd7002fff (0x1000) MX[B]
	[15] -1	0	0xd7001000 - 0xd7001fff (0x1000) MX[B]
	[16] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[17] -1	0	0xd5020000 - 0xd502ffff (0x10000) MX[B](B)
	[18] -1	0	0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
	[19] -1	0	0xd4002000 - 0xd4002fff (0x1000) MX[B](B)
	[20] -1	0	0xd4000000 - 0xd4000fff (0x1000) MX[B](B)
	[21] -1	0	0xd5030000 - 0xd503ffff (0x10000) MX[B](B)
	[22] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[23] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[24] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[25] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[26] 0	0	0x0000d000 - 0x0000d0ff (0x100) IX[B]
	[27] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[28] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[29] -1	0	0x0000c400 - 0x0000c407 (0x8) IX[B]
	[30] -1	0	0x0000c000 - 0x0000c01f (0x20) IX[B]
	[31] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[32] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
	[33] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[B]
	[34] -1	0	0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
	[35] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[36] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area:     0xb0954000 (size=0x076ac000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: Searching for BusID PCI:2:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: drmOpenMinor returns 4
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf0c3d000
(II) fglrx(0): [drm] mapped SAREA 0xf0c3d000 to 0xb7d30000
(II) fglrx(0): [drm] framebuffer handle = 0xb0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.8.25
(II) fglrx(0):     Date: Jan 14 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.10-gentoo-r6
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xd5020000
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x01e0
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xf8e81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x00954000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1200)
(II) fglrx(0): Largest offscreen area available: 1600 x 320
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/ttyS0"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/ttyS0"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1 
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard1: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf0c3d000 at 0xb7d30000

Und noch das wichtigste aus der /usr/src/linux/.config:

Quellcode

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-gentoo-r6
# Thu Feb 17 06:46:34 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set



#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set


CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VESA_STD is not set
CONFIG_FB_VESA_TNG=y
CONFIG_FB_VESA_DEFAULT_MODE="1024x768@75"
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_FB_SPLASH=y

Zum Seitenanfang

olliwood

Fortgeschrittener

Beiträge: 190

2

17.02.2005, 11:13

Versuch mal an die Kernel Startoptionen ein noapic oder apic=no oder gleich beides anzuhängen.
Is nur so ne Idee, weiss nicht obs was bringt.

Gruß
Oliver

Signaturen sind Bandbreitenverschwendung!

Zum Seitenanfang

Rudwardt

Profi

Beiträge: 738

3

17.02.2005, 18:27

Wie startest Du denn X ? Per Loginmanager oder per startx ? Hört sich so an, als ob X wohl startet aber gleich wieder beendet wird weil danach keine Session geladen werden kann. Welche GUI hast Du installiert ?
__
Rud

Zum Seitenanfang

MrQ

Anfänger

Beiträge: 15

4

17.02.2005, 19:19

Ich habe als Windowmanager KDE installiert. Für den login KDM. Der wird im Moment aber nicht automatisch gestartet. Ich habe startx, startx xdm, startx kdm sowohl unter root als auch unter einem Benutzer ausprobiert. Nichts geht.
Kann ich irgendwie rausbekommen, ob versucht wird eine Session zu laden?
Gruß Jens

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »MrQ« (17.02.2005, 19:24)

Zum Seitenanfang

magjo

Fortgeschrittener

Beiträge: 292

5

17.02.2005, 20:21

Hi
Dumme Frage hast du XSESSION in die rc.conf eingetragen?

Auszug aus: http://www.gentoo.org/doc/de/kde-config.xml

	Quellcode
1 2 3 4	nano -w /etc/rc.conf (Bearbeiten Sie folgende zwei Variablen) XSESSION="kde-3.2.1" DISPLAYMANAGER="kdm"

Unmögliches erledigen wir sofort. Wunder dauern etwas länger.

Zum Seitenanfang

MrQ

Anfänger

Beiträge: 15

6

19.02.2005, 00:09

Ja, habe ich. Ich habe es überprüft. Ich habe jetzt auch mal startkde eingegeben. Da bekam ich folgende Fehlermeldungen:

Quellcode

xsetroot:  unable to open display ''
xset:  unable to open display ""
xset:  unable to open display ""
xsetroot:  unable to open display ''
startkde: Starting up...
ksplash: cannot connect to X server 
kdeinit: Aborting. $DISPLAY is not set.
Warning: connect() failed: : No such file or directory
ksmserver: cannot connect to X server 
startkde: Shutting down...
Warning: connect() failed: : No such file or directory
Error: Can't contact kdeinit!
unix_connect: can't connect to server (unix:/tmp/mcop-root/007_local-25b6-4212e5fa)
startkde: Running shutdown scripts...
startkde: Done.

Gruß Jens

Zum Seitenanfang

MrQ

Anfänger

Beiträge: 15

7

19.02.2005, 00:35

Selbst wenn ich export DISPLAY=meincomputername:0.0 angebe bokomme ich die Fehlermeldungen. Nur dann mit xsetroot: unable to open display 'meincomputername:0.0' usw.
Gruß Jens

Zum Seitenanfang

Rudwardt

Profi

Beiträge: 738

8

19.02.2005, 02:08

startkde geht auch erst, wenn X schon läuft. Das wird normalerweise am Ende von xinitrc oder so aufgerufen.

Was passiert denn wenn Du einfach nur "X" eingibst und startest ?
__
Rud

Zum Seitenanfang

MrQ

Anfänger

Beiträge: 15

9

22.02.2005, 13:06

Erstmal vielen Dank an alle, die sich hier bemüht haben. Ich habe mittlerweile zu der radikalen Lösung gegriffen und Gentoo neu aufgesetzt.
Xorg und ATI liefen dabei auf Anhieb.
Gruß Jens

Zum Seitenanfang

SebastianB

Anfänger

Beiträge: 2

10

22.02.2005, 20:45

Also ich hab ein anderes, aber ähnliches Problem... Hab eine Radeon 9800Pro und möchte die 3D unterstützung aktivieren. Dazu habe ich natürlich die ati-drivers emerged... dann habe ich die XF86config-4 Datei erzeugt habe das Kernel Modul fglrx geladen hab die XF86config-4 in xorg.conf umbenannt und X gestartet... Hat abgebrochen und ne Fehlermeldung ausgegeben, dass die Tastatur und Maus Treiber nicht geladen werden konnten (oder so ähnlich...) hab dann nach ein wenig ausprobieren die Xorg.conf angepasst. Nun startet auch X. wenn ich aber die /opt/ati/bin/fglrxinfo aufrufe steht immer noch

	Quellcode
1 2 3 4 5	bash-2.05b$ ./fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.1)

Und ich kann es nicht mehr lesen... Wenn die 3d Treiber geladen wären, würde dort ja was von ATI stehen, oder täusche ich mich??

Ich hänge hier mal noch das wichtigste aus der xorg.conf mit an.

Quellcode

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4e48
    Screen 0
EndSection


Section "Modes" 
	Identifier "Modes[0]" 
 	Modeline "800x600" 37.44 800 816 928 1072 600 600 605 626 
 	Modeline "800x600" 43.68 800 816 928 1072 600 600 610 626 
 	Modeline "800x600" 49.92 800 816 928 1072 600 600 610 626 
	ModeLine "1024x768"      94.50 1024 1072 1168 1376  768  769  772  808 +hsync +vsync
# Modeline "800x600" 56.16 800 816 928 1072 600 600 610 626 
# Modeline "800x600" 62.40 800 816 928 1112 600 600 610 626 
# Modeline "800x600" 68.64 800 816 928 1112 600 600 610 626 
# Modeline "800x600" 72.80 800 816 928 1112 600 600 610 626 
# Modeline "1152x864" 90.48 1152 1184 1400 1536 864 880 890 902 
	Modeline "1152x864" 104.72 1152 1184 1400 1536 864 880 890 902 
EndSection 
Section "Screen"
	Identifier "Screen0"
	Device     "ATI Graphics Adapter"
	Monitor    "Monitor0"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes "1024x768"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1024x768"
	EndSubSection
EndSection

Section "dri"
# Access to OpenGL ICD is allowed for all users:
    	Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    	Group 100    # users
#   	Mode 0660
EndSection

Hoffe jemand kann helfen. Vielen DAnk im voraus.

Zum Seitenanfang

SebastianB

Anfänger

Beiträge: 2

11

25.02.2005, 09:28

will mir keiner, oder kann mir keiner helfen???

Zum Seitenanfang

Rudwardt

Profi

Beiträge: 738

12

25.02.2005, 13:24

opengl-update gemacht ? Mal die anderen Threads gelesen ? Zum Thema ATI und Xorg/3d gibt es hier wahrlich reichlich.
__
Rud

Zum Seitenanfang

otty

Schüler

Beiträge: 96

13

27.02.2005, 14:30

Ich würde dir gerne helfen, nur habe ich das selbe problem. und zwar mit folgenden grafikkarten: (alle getestet)

RIVA TNT 2 M64
Radeon 9600 XT
Geforce FX 5700

-->stürzen ab, schwarzer bildschrim

Radeon 9500 Pro
Radeon 8500 LE
--> gehen wunderbar!

das selbe system, selber kernel alles gleich, nur immer ein emerge ati-drivers /nvidia-kernel und opengl-update...

wenns nicht geht, wie bei den 3 ersten grakas, dann habe ich KEINE fehlermeldung irgendwo, und nurn ne schwarzen bildschrim. ich verzweilfle hier auch gerade recht heftig.

muh

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »otty« (27.02.2005, 14:31)

Zum Seitenanfang

spinix

Anfänger

Beiträge: 8

14

15.02.2006, 15:08

@sebastianB

Option "UseInternalAGPGART" "yes"

damit schon experementiert?

und die module dri und drm geladen?

@otty
hab ne 9800pro und es geht auch nicht, selbes probelm geht nur dann wenn ich dri ausschalte...wobei ich gleich andere treiber nutzen könnte oder meine geforce4mx einstecken könnte...

ein 64bit system, kanns daran liegen? ich hab als *-agp im kernel nur amd64_agp zur auswahl und kein via_agp (via k8t800 board) auch in der config tauch CONFIG_AGP_VIA nicht auf, wenn ich es manuell setze verschwindets wieder...Oo...

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »spinix« (15.02.2006, 15:09)

Zum Seitenanfang

maggu2810

OSI Layer 8

Beiträge: 5 552

15

15.02.2006, 16:01

Verwendet ihr Framebuffer? Dann auf vesa bzw vesa-tng umsteigen. RadeonFB und fglrx beisen sich.

"Erst nachdem wir alles verloren haben, haben wir die Freiheit, alles zu tun."
"It's only after we've lost everything, that we're free to do anything!"

Jabber: Die ID kann via PN erfragt werden.