Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: GentooForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

1

14.03.2015, 14:04

no screens found(EE)

Ich bin dabei mein X zu konfigurieren. Ich verwende genkernel mit systemd . Geplant ist Fluxbox. Das System/Kernel funktioniert. Erststart von X war noch nicht erfolgreich.

Auszug #dmesg . Vollständig anbei

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
#dmesg
[    6.091584] ACPI: Power Button
[PWRB]
[    6.091676] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.091713] ACPI:
Power Button [PWRF]
[    6.124864] rtc_cmos 00:01: RTC can wake
from S4
[    6.125000] rtc_cmos 00:01: rtc core: registered
rtc_cmos as rtc0
[    6.125027] rtc_cmos 00:01: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
[    6.145654] piix4_smbus
0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   
6.145686] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller
at 0xb20
[    6.154763] ohci-pci: OHCI PCI platform driver
[   
6.154931] ohci-pci 0000:00:12.0: OHCI PCI host controller
[   
6.154938] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus
number 3
[    6.154963] ohci-pci 0000:00:12.0: irq 16, io mem
0xfe9fe000
[    6.218534] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
[    6.218537] usb usb3: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
[    6.218538]
usb usb3: Product: OHCI PCI host controller
[    6.218540] usb
usb3: Manufacturer: Linux 3.18.7-gentoo ohci_hcd
[    6.218541]
usb usb3: SerialNumber: 0000:00:12.0
[    6.218718] hub 3-0:1.0:
USB hub found
[    6.218740] hub 3-0:1.0: 3 ports detected
[   
6.219039] ohci-pci 0000:00:12.1: OHCI PCI host controller
[   
6.219045] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus
number 4
[    6.219060] ohci-pci 0000:00:12.1: irq 16, io mem
0xfe9fd000
[    6.224350] dcdbas dcdbas: Dell Systems Management
Base Driver (version 5.6.0-3.2)
[    6.233796] input: PC Speaker
 as
/devices/platform/pcspkr/input/input5
[    6.278507] usb usb4: New
USB device found, idVendor=1d6b, idProduct=0001
[    6.278511] usb
usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  
 6.278512] usb usb4: Product: OHCI PCI host controller
[   
6.278513] usb usb4: Manufacturer: Linux 3.18.7-gentoo ohci_hcd
[  
 6.278514] usb usb4: SerialNumber: 0000:00:12.1
[    6.278866] hub
4-0:1.0: USB hub found
[    6.278878] hub 4-0:1.0: 3 ports
detected
[    6.279297] ohci-pci 0000:00:13.0: OHCI PCI host
controller
[    6.279304] ohci-pci 0000:00:13.0: new USB bus
registered, assigned bus number 5
[    6.279330] ohci-pci
0000:00:13.0: irq 18, io mem 0xfe9fc000
[    6.287019] [drm]
Initialized drm 1.1.0 20060810
[    6.338566] usb usb5: New USB
device found, idVendor=1d6b, idProduct=0001
[    6.338569] usb
usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  
 6.338570] usb usb5: Product: OHCI PCI host controller
[   
6.338571] usb usb5: Manufacturer: Linux 3.18.7-gentoo ohci_hcd
[  
 6.338572] usb usb5: SerialNumber: 0000:00:13.0
[    6.338767] hub
5-0:1.0: USB hub found
[    6.338784] hub 5-0:1.0: 3 ports
detected
[    6.339095] ohci-pci 0000:00:13.1: OHCI PCI host
controller
[    6.339102] ohci-pci 0000:00:13.1: new USB bus
registered, assigned bus number 6
[    6.339118] ohci-pci
0000:00:13.1: irq 18, io mem 0xfe9f7000
[    6.395171] kvm: Nested
Virtualization enabled
[    6.395175] kvm: Nested Paging enabled
[
   6.398646] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
[    6.398648] usb usb6: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
[    6.398650] usb usb6: Product:
OHCI PCI host controller
[    6.398651] usb usb6: Manufacturer:
Linux 3.18.7-gentoo ohci_hcd
[    6.398652] usb usb6:
SerialNumber: 0000:00:13.1
[    6.398832] hub 6-0:1.0: USB hub
found
[    6.398851] hub 6-0:1.0: 3 ports detected
[   
6.426558] [drm] radeon kernel modesetting enabled.
[    6.426846]
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9
0x1028:0x010E).
[    6.426857] [drm] register mmio base:
0xFEAE0000
[    6.426857] [drm] register mmio size: 131072
[   
6.431007] ATOM BIOS: CEDAR
[    6.431059] radeon 0000:01:00.0:
VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[
   6.431060] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 -
0x000000007FFFFFFF
[    6.431062] [drm] Detected VRAM RAM=1024M,
BAR=256M
[    6.431062] [drm] RAM width 64bits DDR
[   
6.431127] [TTM] Zone  kernel: Available graphics memory: 2026708
kiB
[    6.431130] [TTM] Initializing pool allocator
[   
6.431135] [TTM] Initializing DMA pool allocator
[    6.431157]
[drm] radeon: 1024M of VRAM memory ready
[    6.431158] [drm]
radeon: 1024M of GTT memory ready.
[    6.431159] [drm] Loading
CEDAR Microcode
[    6.525913] radeon 0000:01:00.0: Direct
firmware load for radeon/CEDAR_pfp.bin failed with error -2
[   
6.525917] r600_cp: Failed to load firmware "radeon/CEDAR_pfp.bin"
[
   6.525919] [drm:evergreen_init] *ERROR* Failed to load firmware!
[
   6.525921] radeon 0000:01:00.0: Fatal error during GPU init
[   
6.525924] [drm] radeon: finishing device.
[    6.532968] [TTM]
Finalizing pool allocator
[    6.532971] [TTM] Finalizing DMA pool
allocator
[    6.533009] [TTM] Zone  kernel: Used memory at exit:
0 kiB
[    6.533010] [drm] radeon: ttm finalized
[    6.533189]
radeon: probe of 0000:01:00.0 failed with error -2
[    6.584630]
usb 3-2: new low-speed USB device number 2 using ohci-pci
[   
6.644667] usb 4-1: new low-speed USB device number 2 using ohci-pci
[
   6.777819] usb 3-2: New USB device found, idVendor=045e,
idProduct=07f8
[    6.777822] usb 3-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
[    6.777824] usb 3-2: Product:
Wired Keyboard 600
[    6.777825] usb 3-2: Manufacturer:
Microsoft
[    6.785117] input: Microsoft Wired Keyboard 600 as
/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:07F8.0001/input/input6
[
   6.785216] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID
v1.11 Keyboard [Microsoft Wired Keyboard 600] on
usb-0000:00:12.0-2/input0
[    6.792937] input: Microsoft Wired
Keyboard 600 as
/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:045E:07F8.0002/input/input7
[
   6.793040] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID
v1.11 Device [Microsoft Wired Keyboard 600] on
usb-0000:00:12.0-2/input1
[    6.794778] usb 4-1: device
descriptor read/64, error -62
[    7.098052] usb 4-1: New USB
device found, idVendor=13ee, idProduct=0001
[    7.098055] usb
4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   
7.098056] usb 4-1: Product: AND 
[    7.098057] usb 4-1:
Manufacturer: MOON
[    7.098059] usb 4-1: SerialNumber: @LAB
[
   7.107326] input: MOON AND  as
/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:13EE:0001.0003/input/input8
[
   7.107442] hid-generic 0003:13EE:0001.0003: input,hidraw2: USB HID
v1.00 Mouse [MOON AND ] on usb-0000:00:12.1-1/input0
[   
8.063702] snd_hda_intel 0000:01:00.1: irq 26 for MSI/MSI-X
[   
8.117488] sound hdaudioC0D1: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0) type:line
[    8.117491] sound
hdaudioC0D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   
8.117493] sound hdaudioC0D1:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[
   8.117503] sound hdaudioC0D1:    mono: mono_out=0x0
[   
8.117504] sound hdaudioC0D1:    dig-out=0x11/0x0
[    8.117505]
sound hdaudioC0D1:    inputs:
[    8.117507] sound hdaudioC0D1:   
  Front Mic=0x19
[    8.117508] sound hdaudioC0D1:      Rear
Mic=0x18
[    8.117510] sound hdaudioC0D1:      Line=0x1a
[   
8.125831] sound hdaudioC1D0: autoconfig: line_outs=0
(0x0/0x0/0x0/0x0/0x0) type:line
[    8.125834] sound hdaudioC1D0: 
  speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.125835] sound
hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.125836]
sound hdaudioC1D0:    mono: mono_out=0x0
[    8.125837] sound
hdaudioC1D0:    dig-out=0x3/0x0
[    8.125838] sound hdaudioC1D0: 
  inputs:
[    9.218076] EXT3-fs (sda2): using internal journal
[
   9.318269] random: nonblocking pool is initialized
[   
9.349257] Adding 19530748k swap on /dev/sda6.  Priority:-1 extents:1
across:19530748k 
[   10.718290] NET: Registered protocol family
10
[  150.831542] tg3.c:v3.137 (May 11, 2014)
[  150.898676]
libphy: tg3 mdio bus: probed
[  151.000315] tg3 0000:02:00.0 eth0:
Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address
00:26:2d:21:fd:a3
[  151.000318] tg3 0000:02:00.0 eth0: attached
PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 
151.000321] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[  151.000322] tg3 0000:02:00.0 eth0:
dma_rwctrl[76180000] dma_mask[64-bit]
[  151.035248] tg3
0000:02:00.0 enp2s0: renamed from eth0
[  151.057503]
systemd-udevd[2650]: renamed network interface eth0 to enp2s0
[ 
151.074757] systemd-sysctl[2656]: Overwriting earlier assignment of
kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[ 
151.173539] cfg80211: Calling CRDA to update world regulatory
domain
[  151.383571] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 
151.408909] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[
 151.999142] tg3 0000:02:00.0 enp2s0: Link is down
[  154.000793]
tg3 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex
[ 
154.000796] tg3 0000:02:00.0 enp2s0: Flow control is on for TX and on
for RX
[  154.000802] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link
becomes ready


Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
emerge --info

Portage 2.2.14 (python 2.7.9-final-0,
default/linux/amd64/13.0/desktop, gcc-4.8.3, glibc-2.19-r1,
3.18.7-gentoo
x86_64)
=================================================================
System
uname:
Linux-3.18.7-gentoo-x86_64-AMD_Athlon-tm-_II_X4_630_Processor-with-gentoo-2.2
KiB
Mem:     4053416 total,   3352596 free
KiB Swap:   19530748 total,
 19530748 free
Timestamp of tree: Sat, 14 Mar 2015 12:00:01
+0000
ld GNU ld (Gentoo 2.24 p1.4) 2.24
app-shells/bash:       
  4.2_p53
dev-lang/perl:            5.20.1-r4
dev-lang/python: 
        2.7.9-r1, 3.3.5-r1, 3.4.1
dev-util/cmake:          
2.8.12.2-r1
dev-util/pkgconfig:       0.28-r1
sys-apps/baselayout:
     2.2
sys-apps/openrc:          0.13.11
sys-apps/sandbox:   
     2.6-r1
sys-devel/autoconf:       2.69
sys-devel/automake: 
     1.13.4
sys-devel/binutils:       2.24-r3
sys-devel/gcc:   
        4.8.3
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:
       2.4.4
sys-devel/make:          
4.1-r1
sys-kernel/linux-headers: 3.18
(virtual/os-headers)
sys-libs/glibc:          
2.19-r1
Repositories:
gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*
-@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2
-pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf
/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release
/etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2
-pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2
-pipe"
FEATURES="assume-digests binpkg-logs
config-protect-if-modified distlocks ebuild-locks fixlafiles
merge-sync news parallel-fetch preserve-libs protect-owned sandbox
sfperms strict unknown-features-warn unmerge-logs unmerge-orphans
userfetch userpriv usersandbox usersync"
FFLAGS="-O2
-pipe"
GENTOO_MIRRORS="http://gentoo.arcticnetwork.ca/
ftp://de-mirror.org/gentoo/
http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/"
LANG="de_DE.UTF-8"
LDFLAGS="-Wl,-O1
-Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive
--links --safe-links --perms --times --omit-dir-times --compress
--force --whole-file --delete --stats --human-readable --timeout=180
--exclude=/distfiles --exclude=/local
--exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
USE="X
a52 aac acl acpi alsa amd64 berkdb bluetooth branding bzip2 cairo
cdda cdr cli consolekit cracklib crypt cups cxx dbus dri dts dvd dvdr
emboss encode exif fam firefox flac fortran gdbm gif glamor gpm gtk
iconv ipv6 jpeg lcms ldap libav libnotify mad mmx mng modules mp3 mp4
mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf
png policykit ppds qt3support qt4 readline sdl session spell sse sse2
ssl startup-notification svg systemd tcpd tiff truetype udev udisks
unicode upower usb vorbis wxwidgets x264 xcb xml xv xvid zlib"
ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp
atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938
es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio
via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core
authz_core socache_shmcb unixd actions alias auth_basic authn_alias
authn_anon authn_dbm authn_default authn_file authz_dbm authz_default
authz_groupfile authz_host authz_owner authz_user autoindex cache cgi
cgid dav dav_fs dav_lock deflate dir disk_cache env expires
ext_filter file_cache filter headers include info log_config logio
mem_cache mime mime_magic negotiation rewrite setenvif speling status
unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi
words flow plan sheets stage tables krita karbon braindump author"
CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load
memory rrdtool swap syslog" CPU_FLAGS_X86="mmx sse sse2"
ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate
evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip
navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf
superstar2 timing tsip tripmate tnt ublox ubx"
INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux"
LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001
mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console
presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice"
PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7"
PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19
ruby20" USERLAND="GNU" VIDEO_CARDS="radeon"
XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options
ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat
logmark ipmark dhcpmac delude chaos account"
Unset: 
CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL,
MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS,
PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, SYNC, USE_PYTHON




[code]#less /etc/portage/make.conf

# These settings were set by the
catalyst build script that automatically
# built this stage.
#
Please consult /usr/share/portage/config/make.conf.example for a
more
# detailed example.
CFLAGS="-O2
-pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing
your CHOST is not something that should be done lightly.
# Please
consult http://www.gentoo.org/doc/en/change-chost.xml before
changing.
CHOST="x86_64-pc-linux-gnu"
# These are the
USE flags that were used in addition to what is provided by the
#
profile used for building.
USE="X systemd -kde -gnome
"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"

GENTOO_MIRRORS="http://gentoo.arcticnetwork.ca/
ftp://de-mirror.org/gentoo/
http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/"
VIDEO_CARDS="radeon"


Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Auszug xorg-log

[   611.232] (--) using VT number 7

[   611.237] (II) [KMS] drm report modesetting isn't supported.
[   611.237] (EE) Screen 0 deleted because of no matching config section.
[   611.237] (II) UnloadModule: "radeon"
[   611.237] (EE) Device(s) detected, but none match those in the config file.
[   611.237] (EE) 
Fatal server error:
[   611.237] (EE) no screens found(EE) 
[   611.237] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   611.237] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   611.237] (EE) 
[   611.240] (EE) Server terminated with error (1). Closing log file.
»michi-monster« hat folgende Dateien angehängt:
  • dmsg.txt (47,05 kB - 1 mal heruntergeladen - zuletzt: 14.03.2015, 19:05)
  • xorg-log1.txt (19,03 kB - 0 mal heruntergeladen)

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »michi-monster« (14.03.2015, 16:32) aus folgendem Grund: Achso: Xlog vergessen: das Ende, den Rest hänge ihc an [ 121.649] (--) using VT number 7 [ 121.655] (II) [KMS] drm report modesetting isn't supported. [ 121.655] (EE) Screen 0 deleted because of no matching config section. [ 121.655] (II) UnloadModule: "radeon" [ 121.655] (EE) Device(s) detected, but none match those in the config file. [ 121.655] (EE) Fatal server error: [ 121.655] (EE) no screens found(EE) [ 121.655] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 121.655] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 121.655] (EE) [ 121.658] (EE) Server terminated with error (1). Closing log file. modprobe radeon habe ich bereits getestet. Bringt Nix.


2

14.03.2015, 19:16

Zitat von »dmesg«

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
[    6.431157] [drm] radeon: 1024M of VRAM memory ready
[    6.431158] [drm] radeon: 1024M of GTT memory ready.
[    6.431159] [drm] Loading CEDAR Microcode
[    6.525913] radeon 0000:01:00.0: Direct firmware load for radeon/CEDAR_pfp.bin failed with error -2
[    6.525917] r600_cp: Failed to load firmware "radeon/CEDAR_pfp.bin"
[    6.525919] [drm:evergreen_init] *ERROR* Failed to load firmware!
[    6.525921] radeon 0000:01:00.0: Fatal error during GPU init
[    6.525924] [drm] radeon: finishing device.
[    6.532968] [TTM] Finalizing pool allocator
[    6.532971] [TTM] Finalizing DMA pool allocator
[    6.533009] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[    6.533010] [drm] radeon: ttm finalized
[    6.533189] radeon: probe of 0000:01:00.0 failed with error -2
Dürfte der Ursprung sein.
Hier fehlt vermutlich die Firmware - schau dazu im https://wiki.gentoo.org/wiki/Radeon

3

14.03.2015, 21:28

Hmm wie alt ist denn deine AMD / Ati Grafikkarte ? AMD's proprietäre Treiber unterstützen allerdings nur R600 und neuere GPUs älter nutzen den quelloffenen xorg-x11 Treiber.

Zumindest steht das hier im Wiki so
http://wiki.gentoo.org/wiki/ATI_FAQ/de
''''''''''''''''''''''''''''''''''''''''''''''''
Gentoo-Linux
der G-Punkt eines Pc´s

''''''''''''''''''''''''''''''''''''''''''''''''