Hoi,
im Moment habe ich keine asound.conf und keine emu10k1.conf. Es lief vorher beides ohne die beiden. Den Test mache ich mit speaker-test -c6.
PCM steuert jetzt die hinteren Boxen, Wave-Surround die vorderen. Der Bass und Center tun wieder gar nichts.
Könnte jemand eine funktionierende asound.conf posten? Ich will doch nichts anderes, als vorn, hinten und center/lfe getrennt einstellen zu können.
Noch etwas dazu: Wenn ich die Jacks einstellen möchte, lassen sie sich zuerste verändern aber beim nächsten Start des Mixers sind sie wieder wie vorher. Die meisten sind auf Disabled/Input eingestellt. Kann das was dmit zu tun haben?
Hier die Ausgabe von aplay -l bzw. aplay -L:
gentoo-hure etc # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Live [SB Live 5.1 Dell OEM [SB0220]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: Live [SB Live 5.1 Dell OEM [SB0220]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: Live [SB Live 5.1 Dell OEM [SB0220]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
gentoo-hure etc # aplay -L
default:CARD=Live
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
Default Audio Device
front:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
Front speakers
rear:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
Rear speakers
center_lfe:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
Center and Subwoofer speakers
surround40:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
4.0 Surround output to Front and Rear speakers
surround41:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], ADC Capture/Standard PCM Playback
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
iec958:CARD=Live,DEV=0
SB Live 5.1 Dell OEM [SB0220], Multichannel Capture/PT Playback
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
Kann mir jemand erklären, was die Ausgaben bedeuten und wie ich damit umzugehen habe?